级联光栅结合Sagnac环的可调谐光纤激光器

提出并验证了一种单-双波长可调谐掺铒光纤激光器。利用级联光纤布拉格光栅(Cascaded Fiber Bragg gratings,Cascaded FBGs)结合Sagnac环结构所产生的复合滤波效应,实现较高精细度滤波,并通过调节环内偏振控制器(Polarization Controller,PC),引入双折射效应,得到波长可调谐的光纤激光器。基于耦合模理论并使用传输矩阵法对该结构的传输特性进行了分析,在此基础上搭建实验系统,验证了理论分析的正确性。实验结果表明:通过调节PC,激光器输出激光的波长范围约为1 555.644～1 556.112 nm,双波长间隔的可调范围约为0.108～0.452 nm,单-双波长的边模抑制比(SMSR)均高于40 dB;在稳定性测试中,输出单-双波长激光的波长最大漂移量小于0.008 nm。该方法具有结构简单、调谐方便、易于实现且精细度较高的优点,可应用于密集波分复用及全光通信系统等领域。     

Influence of stereoelectronic effects on the 1JC─F spin–spin coupling constant in fluorinated heterocyclic compounds

The Perlin effect and its analog for fluorinated compounds (the fluorine Perlin-like effect) manifest on one-bond C─H (C─F for the fluorine Perlin-like effect) spin–spin coupling constants (SSCCs) in six-membered rings. These effects can be useful to probe the stereochemistry (axial or equatorial) of the C─H and C─F bonds, respectively. The origin of these effects has been debatable in the literature as being due to hyperconjugative interactions, dipolar effects, and induced current density. Accordingly, a variety of model compounds has been used to probe such effects since the cyclohexanone carbonyl group and the endocyclic heteroatom lone pairs play different roles on the above-mentioned effects. Thus, the ¹J_C─F SSCC in fluorinated lactams and lactones were theoretically studied to gain further insight on the nature of the fluorine Perlin-like effect. In addition, because the intramolecular α-effect has recently gained attention for its importance in the reactivity and stereoelectronic interactions in peroxide compounds, some fluorinated 1,2-dioxanes and 1,2-dithianes were studied to evaluate the role of the α-effect on the behavior of ¹J_C─F SSCCs. Differently from fluorinated ketones and ethers, the fluorine Perlin-like effect in the amides and esters cannot be explained by hyperconjugative or dipolar interactions alone, because the resonance in these groups affect the ¹J_C─F values. The O─O and S─S-containing systems exhibit a strong fluorine Perlin-like effect, but unlike the α-effect, this behavior cannot be explained neither by hyperconjugation nor by dipolar interactions alone; the spatial proximity of the C─F and O─O/S─S bonds is proposed to affect the magnitude of the ¹J_C─F SSCC.     

Anisotropy Effects and Observational Data on the Constraints of Evolution Dark Energy Models

We investigate cosmological dark energy models where the accelerated expansion of the universe is driven by a field with an anisotropic universe. The constraints on the parameters are obtained by maximum likelihood analysis using observational of 194 Type Ia supernovae(SNIa) and the most recent joint light-curve analysis(JLA) sample. In particular we reconstruct the dark energy equation of state parameter w(z) and the deceleration parameter q(z). We find that the best fit dynamical w(z) obtained from the 194 SNIa dataset does not cross the phantom divide line w(z) =-1 and remains above and close to w(z)≈-0.92 line for the whole redshift range 0 ≤ z ≤ 1.75 showing no evidence for phantom behavior. By applying the anisotropy effect on the ΛCDM model, the joint analysis indicates that ?_(σ0)= 0.0163 ± 0.03,with 194 SNIa, ?_(σ0)=-0.0032 ± 0.032 with 238 the SiFTO sample of JLA and ?_(σ0)= 0.011 ± 0.0117 with 1048 the SALT2 sample of Pantheon at 1σ′confidence interval. The analysis shows that by considering the anisotropy, it leads to more best fit parameters in all models with JLA SNe datasets. Furthermore, we use two statistical tests such as the usual χ_(min)~2/dof and p-test to compare two dark energy models with ΛCDM model. Finally we show that the presence of anisotropy is confirmed in mentioned models via SNIa dataset.     

具有学习和退化效应的单机干扰管理问题

针对工件同时具有学习和退化效应、机器具有可用性限制这一问题,建立可预见性单机干扰管理模型。在这一模型中,工件的加工时间是既与工件所排的加工位置又与工件开始加工的时间有关的函数。同时,在生产过程中由于机器发生故障或定期维修等扰动事件导致机器在某段时间内不能加工工件。目标是在同时考虑原目标函数和由扰动造成的偏离函数的情况下,构建一个新的最优时间表序列。根据干扰度量函数的不同研究了两个问题,第一个问题的目标函数是极小化总完工时间与总误工时间的加权和;第二个问题的目标函数是极小化总完工时间与总提前时间的加权和。对于所研究的问题,首先证明了最优排序具有的性质,然后建立了相应的拟多项式时间动态规划算法。     

带阀点效应水火联合调度问题的一种半定凸松弛求解法

水火联合调度问题是电力系统中一类复杂的优化问题。合理安排调度周期内的水火电出力,确定一个最优发电计划,可以带来巨大的经济效益。在实际系统中,汽轮机调汽阀开启时出现的拔丝现象会使机组耗量特性产生阀点效应。忽略阀点效应,在一定程度上降低求解的精度。本文考虑带阀点效应的水火联合调度问题。该问题非凸非光滑,且带有非线性约束,直接使用确定性全局优化方法求解是相当困难的。本文使用高效的半定规划求解此问题。首先用耗量特性函数的初始周期代替其余有限的周期,并对其进行二次拉格朗日插值拟合。再通过引进0-1变量,得到整个耗量特性函数的近似,进而把问题松弛为半定规划模型。最后,采用凸规划应用软件包CVX求解一个仿真算例,得到一个近似全局最优解。     

Enthalpic effect of polyacrylonitrile on the concentrated solutions in dimethyl sulfoxide: Strong thixotropic behavior and formation of bound solvents

The effect of dipole–dipole interaction by nitrile groups of PAN on the bound state of solvent molecules and the concentrated solution properties in DMSO was investigated. Variation of a solution viscosity exhibited three overlap concentrations, C1*, C2*, and C3*, at 2.7, 8.6, and 16.3 wt%, respectively, representing the transition of concentration regions in the order of dilute, unentangled‐semi dilute, entangled‐semi dilute, and concentrated regions. The two‐dimensional mapping of FT‐IR analysis and dielectric measurement confirmed that the intermolecular interaction of PAN was suddenly enhanced at the C*s, inducing polarization to DMSO. In the ice‐melting process of PAN solutions, two different melting peaks (T_m2 and T_m3) of DMSO newly appeared at each C2* and C3*, suggesting the different types of bound solvents. In the concentrated solutions, the saturated dielectric constant and the strongly delayed evaporation of the solvent even at the boiling point of DMSO along with strong thixotropic behavior were indicative of the stronger confinement state of bound DMSO than in the semidilute solutions. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1080–1089     

Effect of rotation in magneto-thermoelastic transversely isotropic hollow cylinder with three-phase-lag model

This article deals with the various heat source responses in a transversely isotropic hollow cylinder under the purview of three-phase-lag (TPL) generalized thermoelasticity theory. In presence of magnetic field and due to the rotating behavior of the cylinder, the governing equations are redefined for generalized thermoelasticity with thermal time delay. In order to obtain the stress, displacement and temperature field, the field functions are expressed in terms of modified Bessel functions in Laplace transformed domain. When the outer radius of hollow cylinder tends to infinity, the corresponding results are discussed. Finally an appropriate Laplace transform inversion technique is adopted.     

Physics-based plasticity model incorporating microstructure changes for severe plastic deformation

During machining processes, materials undergo severe deformations that lead to different behavior than in the case of slow deformation. The microstructure changes, as a consequence, affect the materials properties and therefore influence the functionality of the component. Developing material models capable of capturing such changes is therefore critical to better understand the interaction process–materials. In this paper, we introduce a new physics model associating Mechanical Threshold Stress (MTS) with Dislocation Density (DD) models. The modeling and the experimental results of a series of large strain experiments on polycrystalline copper (OFHC) involving sequences of shear deformation and strain rate (varying from quasi-static to dynamic) are very similar to those observed in processes such as machining. The Kocks–Mecking model, using the mechanical threshold stress as an internal state variable, correlates well with experimental results and strain rate jump experiments. This model was compared to the well-known Johnson–Cook model that showed some shortcomings in capturing the stain jump. The results show a high effect of rate sensitivity of strain hardening at large strains. Coupling the mechanical threshold stress dislocation density (MTS–DD), material models were implemented in the Abaqus/Explicit FE code. The model shows potentialities in predicting an increase in dislocation density and a reduction in cell size. It could ideally be used in the modeling of machining processes.     

Cooling of Al-Cu-Fe-Cr-Ni high entropy alloy with different size

Cooling rate is critical in synthesizing nanoparticles (NPs), which determines the microstructure and the corresponding mechanical, thermal and electrical properties. This research, as the most initiative one, studies microstructure formation of three different sized high entropy alloy (HEA) NPs under three different cooling rates, employing molecular dynamics (MD). Through analysis of potential energy, “common neighbor analysis”, radial distribution function, and also the mean square displacement, it is found that phase transition temperature is independent of HEA NP size, and as cooling rate decrease, more amorphous atoms transform to fcc and hcp orders, which can alternate the mechanical and thermodynamic properties of the final structure. The Cr atoms are found to aggregate into one cluster inside the NP and also try to migrate to the surface of the HEA NP, due to the large diffusivity. This research provides new insights in the size dependency of the nanoparticles, which may motivate more applications in which the strong size dependency is not desirable.     

管式炉中半导体激光器巴条Au80Sn20焊料封装研究

为了提高半导体激光器的封装质量和效率,引入管式炉利用夹具进行批量封装。由于封装质量的好坏直接影响半导体激光器的输出特性和使用寿命,利用MOCVD生长808 nm芯片,重点分析了管式炉温度和封装时间对半导体激光器巴条双面金锡封装质量的影响。利用X射线检测、结电压、光电特性参数和smile效应测试手段,确定了管式炉封装半导体激光器巴条的最优封装条件,为以后的产业化提供了指导意义。